Able Series (Co Axial)


Compact and lightweight for standard machine use

  • Reduction Ratio     : 1/3 -1/81
  • Backlash (3 types) :
    • PB :0.05′ (below 3 min) ,
    • LB: 0.08′ (below 5 min), Standard : 0.25′ (below 15 min)
    • *LB :166′ (below 10 min) for Frame B in the spec table
Features
  • Lightweight aluminum construction
  • Compact
  • 3 backlash levels available
  • Compatible with all servomotors through the use of adapters
  • No need to replace the grease for the life of the product. Installable at any angle

Perfectly compatible with the mounting dimensions of its predecessor, the VRSF Series. Enhancements on the gear design led to improvements on torque, efficiency and quiet operation.

  • Reduction Ratio     : 1/3 -1/81
  • Backlash (3 types) :
    • PB :0.05′ (below 3 min) ,
    • LB: 0.08′ (below 5 min), Standard : 0.25′ (below 15 min)
    • *LB :166′ (below 10 min) for Frame B in the spec table
Features
  • New gear design with a fully-complementing roller bearing structure for increased torque transmission
  • Max. high input speed at 6000 spm
  • High performance grease for higher efficiency
  • 3 backlash level available
  • Compatible with all types of servomotors with the use of adaptors
  • Grease replacement is not required throughout the product’s lifetime; can be installed at any desired angle without worry of leakage.

Tapered roller bearings for high load capacity

  • Reduction Ration : 1/3 -1/100
  • Backlash                 :0.05′
Features
  • High load capacity with tapered roller bearings
  • Backlash is within 3 min-perfect solution for precision positional control
  • No grease leak through the use of high viscosity anti separation grease.
  • High efficiency with no need for input section oil seal
  • Grease replacement is not required throughout the product’s lifetime; can be installed at any desired angle without worry of leakage.

Powerful tool in precision positioning with a backlash of less than 0’05’

  • Reduction Ration : 1/3 -1/100
  • Backlash                 :0.08′ (within 5 min)
 Features
  • Backlash is within 5 min perfect solution for precision positional control
  • No grease leak through the use of high viscosity anti separation grease
  • High efficiency with no need for input section oil seal
  • Compatible with all types of servomotors with the use of adaptors
  • Grease replacement is not required throughout the product’s lifetime; can be installed   

Powerful tool in precision positioning with a backlash of less than 0’03’

  • Reduction Ration : 1/3 -1/100
  • Backlash                 :0.05′ (within 3 min)
Features
  • Backlash is within 3 min perfect solution for precision positional control
  • No grease leak through the use of high viscosity anti separation grease
  • High efficiency with no need for input section oil seal
  • Compatible with all types of servomotors with the use of adaptors
  • Grease replacement is not required throughout the product’s lifetime; can be installed

Compact design with cross roller bearings for high precision

  • Reduction Ratio : 1/3.67 -1/100
  • Backlash               : 0.05′ (within 3 min)
Features
  • Compact,high precision and standard with cross roller bearings
  • Output shaft and output flange, available
  • Backlash is within 3 min perfect solution for precision positional control
  • No grease leak through the use of high viscosity anti separation grease
  • High efficiency with no need for input section oil seal
  • Compatible with all types of servomotors with the use of adaptors
  • Grease replacement is not required throughout the product’s lifetime; can be installed desired angle without worry of leakage.

Output flange and tapered roller bearings for high load capacity

  • Reduction Ratio : 1/4 -1/100
  • Backlash               : 0.05′ (within 3 min)
Features
  • High load capacity output flange with tapered roller bearings
  • Backlash is within 3 min perfect solution for precision positional control
  • No grease leak through the use of high viscosity anti separation grease
  • High efficiency with no need for input section oil seal
  • Compatible with all types of servomotors with the use of adaptors
  • Grease replacement is not required throughout the product’s lifetime; can be installed desired angle without worry of leakage.
ALUMINIUM PROFILE
SERVO MOTOR
SCARA ROBOTS
6-AXIS ROBOT
Nachi
SPEED REDUCER
PRECISION REDUCTION GEAR
DD MOTOR
MOTION CONTROLLER